Product Information

A-1 wall Putty is white cement based putty. It's used to fill fine pores in walls and ceilings, so you get the smooth, dry surface that's so essential for painting. A-1 wall putty has better water-resistance, adhesive strength and durability than ordinary putties. The most significant feature of this putty however, is that it doesn't need to be water cured at all. Making it a mini-revolution in putties!

We offer superior quality Wall Putty that is utilized in large number of industries. It is used for new /old building wall paint previous primer putty interior and exterior. Wall Care Putty is available in varying quantities as per the requirements of customers.

Packaging: Available in 5 & 20 Kg packs.

Application

Areas of Application of A-1 WallPutty:
Exterior & Interior Walls of any building where an aesthetic.
Decorative coating is desired.
Buildings like Houses, Offices, Shopping-Malls, Bungalows, Outhouses, Farmhouses, Stadiums, Trade & Technology Parks, Educational Institutes, Convention Centers, Airport & Railway Stations, Operas & Theatres, Museums & Exhibition Halls and even Flyover Walls.

Most applications of A-1 Wall Putty are

• The surface should be made free from unwanted adhering material with wire brush/emery paper
• Use A-1 wall puttyon plastered surface, as a protective base-coat, before you apply expensive paint.
• If the plaster is made with Grey Cement, useA-1 wall putty to level the surface. Generally, a 5-12 mm coat of this product will remove the undulations.
• Make a paste of A-1 Wall Putty with water and apply on the already moistened surface in upward direction uniformly with putty blade
• On drying, remove the projected marks gently with putty blade
• After about 2-4 hrs, apply second coat of wall putty and see that the total thickness of putty on the wall is about 1 1/2 mm
• Allow the surface to dry completely and remove any marks with putty blade & then rub the surface gently with very fine emery paper before application of paint
• Mix the putty thoroughly to get best results and prepare only that much quantity which can be consumed in 1 hour
• In order to get best results, for new surface area, apply 1 or 2 coats of white cement wash prior to application of putty
• Do not wet the surface too much before putty is applied.