info@abronexports.com, info@abron.in
 
   
 
askaquestion
 
 

105 - Industrial Estate,
Ambala Cantt-133001,Haryana (India)

E-mail- info@abronexports.com

Click Here For More Details

Online Support
skypmsnfacebook
indiaflagglobe
 

Physics All Items

A |B |C |D |E |F |G |H |I |J |K |L |M |N |O |P |Q |R |S |T |U |V |W |Y |Z |
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | [«Back || | Next »] |
 

Inclined Plane superior

AP-746-B

As above Superior Quality Sunmica top pulley, pan, roller, 50cm General

Price : Rs 0 eachSend Enquiry
 
   
   
 

Inclined Track Double 'Abron'

AP-747

A planed board 600 x 75 mm hinged to the both sides of the base board of size
900 x 75 mm. The upper board is fitted with aluminium railing for smooth flow
of steel balls. Both upper boards can be set at any angle by clamping the wing
nuts separately. Provided with set of steel balls. wooden with both sides ARC.
set of steel balls

Price : Rs 0 eachSend Enquiry
 
   
   
 

Inclined Trolly

AP-748T

A 3" X 3" for above
B 3"x 2" x "
C 4"x 2.5"x 1"

Price : Rs 0 eachSend Enquiry
 
   
   
 

Inductance Box 'Abron'

AP-749B

A 1 dial Any Each 10 steps Each dial has 10 steps. These are housed in superior
quality teak wood but with two 4 mm terminals for connection and dials fitted at
top made of high quality black mica.
Model (B) Two Dials (any one range)
Sub Divn.(inductance) No. of Steps Total (Inductance)
(i) 100 uH 20 10 mH
(ii) 1 mH 20 100 mH
(iii) 10 mH 20 1000 mH
(iv) 100 H 20 10 H

Price : Rs 0 eachSend Enquiry
 
   
   
 

Inductance Box 'Abron'

AP-749C

A 1 dial Any Each 10 steps Each dial has 10 steps. These are housed in superior
quality teak wood but with two 4 mm terminals for connection and dials fitted at
top made of high quality black mica.
Model (C) Three Dials (any one range)
Sub Divn.(inductance) No. of Steps Total (Inductance)
(i) 100 uH 30 100 mH
(ii) 1 mH 30 1000 mH
(iii) 10 mH 30 10 mH

Price : Rs 0 eachSend Enquiry
 
   
   
 

Inductance Box 'Abron'

AP-749D

A 1 dial Any Each 10 steps Each dial has 10 steps. These are housed in superior
quality teak wood but with two 4 mm terminals for connection and dials fitted at
top made of high quality black mica.
Model (D) Four Dials (any one range)
Sub Divn.(inductance) No. of Steps Total (Inductance)
(i) 100 uH 40 1 H
(ii) 1 mH 40 10 H

Price : Rs 0 eachSend Enquiry
 
   
   
 

Inductance Box Four Dials 'Abron'

AP-749A

A 1 dial Any Each 10 steps Each dial has 10 steps. These are housed in superior
quality teak wood but with two 4 mm terminals for connection and dials fitted at
top made of high quality black mica.
Model (D) Four Dials (any one range)
Sub Divn.(inductance) No. of Steps Total (Inductance)
(i) 100 uH 50 1 H

Price : Rs 0 eachSend Enquiry
 
   
   
 

Inductance Box Single Dial 'Abron'

AP-749A

A 1 dial Any Each 10 steps Each dial has 10 steps. These are housed in superior
quality teak wood but with two 4 mm terminals for connection and dials fitted at
top made of high quality black mica.
Model (A) Single Dial (any one range)
Sub Divn.(inductance) No. of Steps Total (Inductance)
(i) 100 uH 10 1000 uH
(ii) 1 mH 10 10 mH
(iii) 10 mH 10 100 mH
(iv) 1 H 10 10 H

Price : Rs 0 eachSend Enquiry
 
   
   
 

Inductance Fixed

AP-750b

50u H/500uH/100mH/200mH/500uH

Price : Rs 0 eachSend Enquiry
 
   
   
 

Inductance Fixed 'Abron'

AP-750a

1H/2H/5H/10H/20 Henry

Price : Rs 0 eachSend Enquiry
 
   
   
 

Induction Coil Spark 25 mm

AP-754-A

This coil is wound with insulated copper wire, has tungsten contacts
ON / OFF reversing switch commutator. Fitted inside wooden box.
Terminals are provided for H. T. output and L. T input of the coil. Upto
50 mm spark being obtained with 4 to 6 volt D. C. input and spart from
50 to 100 mm can be obtained by 6 to 12 volt D. C. input.
with mains operated transformer at extra cost

Price : Rs 0 eachSend Enquiry
 
   
   
 

Induction Coil Spark 50 mm

AP-754A

* This coil is wound with insulated copper wire, has tungsten contacts
ON / OFF reversing switch commutator. Fitted inside wooden box.
Terminals are provided for H. T. output and L. T input of the coil. Upto
50 mm spark being obtained with 4 to 6 volt D. C. input and spart from
50 to 100 mm can be obtained by 6 to 12 volt D. C. input. Note now for all Induction Coils are fitted
with mains operated transformer at extra cost

Price : Rs 0 eachSend Enquiry
 
   
   
 

Induction Coils Spark 10mm

AP-754A

This coil is wound with insulated copper wire, has tungsten contacts ON / OFF
reversing switch commutator. Fitted inside wooden box. Terminals are provided
for H. T. output and L. T input of the coil. Upto 50 mm spark being obtained
with 4 to 6 volt D. C. input and spart from 50 to 100 mm can be obtained by
6 to 12 volt D. C. input.with mains operated transformer at extra cost

Price : Rs 0 eachSend Enquiry
 
   
   
 

Industrial Kelvin Bridge Abron

AP-672-B(i)

Usage : This bridge is very suitable for the use of wires and cables manufacturers. It is being extensively
used for finding the resistance of transformer windings, contact resistance of relays etc.
Basic Structure : Terminals for battery, galvanometer, current and potential terminals are all provided on the bakelite
panel enclosed in a teak wood box.
Range of
Measurement
: The bridge has a range of 0.2 micro ohm to 11ohms.
Range Multiplying Least Factor Count
2 Milli ohm to 11 ohm x 100 2 Milli ohm
0.2 Milli ohm t o 1.1 ohm x 10 0.2 Milli ohm
20 Micro ohm to 11 ohm x 1 20 Micro ohm
2 Micro ohm to .011 ohm x 0.1 2 Micro ohm
0.2 Micro ohm to .0011 ohm x 0.1 0.2 Micro ohm
Maximum Current : 10 amperes intermittently and 5 amperes continuously.
Accuracy : + 0.05% + 1 small division of the slidewire.
Multiplying Ratios : A rotary switch furnishes 5 multiplying ratios of x100, x10, x1, x0.1 and x0.01.
Standard Resistance : There are 10 coils of 0.01 ohm each arranged on a rotary dial plus a circular slidewire
of total resistance 0.01 ohm and 500 sub-divisions. Each sub-division is equal to 0.00002
ohms on the normal range.
Current Reversing Switch : A battery reversing switch is provided to reverse the current in the bridge to eliminate thermal
effects.
AP-672B(ii) INDUSTRIAL KELVIN BRIDGE Same as above but with an additional range factor of x1000
to give the range of measurement as 0.2 micro ohms to 110 ohms.
ACCESSORIES OF INDUSTRIAL KELVIN BRIDGE
AP-672-C ADJUSTABLE D.C. CURRENT SOURCE
Basic Structure :The unit consist of a variac, a step down transformer, a bridge rectifier circuit
and an ammeter of 0 - 10 amp to read current. Two heavy brass terminals are provided for output.
Input Voltage : 230 Volts AC mains 50 c/s.
D. C. Output : Approximate 0 - 10 C, Continuously adjusted to give a variable current of 0-10
Amperes depending upon external load.
AP-672-d CONDUCTIVITY ATTACHMENT
It is an arrangement to hold specimens in the form of wire, rods strip etc. separate current
and potential terminals are provided. Distance between potential point is 500 mm. It can
hold specimen of any size between 1/2" dia rod to 42 S.W.G. wires.
AP-672F CONDUCTIVITY ATTACHMENT bench

Price : Rs 0 eachSend Enquiry
 
   
   
 

Inertia Apparatus Disc & Ring Type Roof Hanging

AP-954B

Solid brass disc of 12.5 cm x 1.25 cm (dia x thickness) with chuck nut.

Provided with Universal clamp with chuck nut for hanging the brass disc


Price : Rs 0 eachSend Enquiry
 
   
   
 

Inertia Balance Strip Type

AP-753B

With G-Clamp

Price : Rs 0 eachSend Enquiry
 
   
   
 

Inertia Balance Wing Wing 'Abron'

AP-753a

With three weight and box Wing Wing

Price : Rs 0 eachSend Enquiry
 
   
   
 

Inertia Disc Brass

AP-751-B

Consisting of a Brass disc about 15 cm diameter, 6 mm, thick size with
arrangement for clamping a split chuck. Supplied with wall bracket.

Price : Rs 0 eachSend Enquiry
 
   
   
 

Inertia Disc, Iron 'Abron'

AP-751A

Consisting of a iron disc about 15 cm diameter, 6 mm, thick size with
arrangement for clamping a split chuck. Supplied with wall bracket.

Price : Rs 0 eachSend Enquiry
 
   
   
 

Inertia Disc, Iron Ring Type 'Abron'

AP-751C

Consisting of a iron disc about 15 cm diameter, 6 mm, thick size with
arrangement for clamping a split chuck. Supplied with wall bracket.

Price : Rs 0 eachSend Enquiry
 
   
   
 

Inertia Ring And Ball Type 'Abron'

AP-752C

With wall bracket wire etc

Price : Rs 0 eachSend Enquiry
 
   
   
 

Inertia Table 'Abron' with Stand

AP-752A

It consists a cast Iron stand duly painted base having 8" dia and Rods having 20" height and " thick. Provided with levelling screw. It has an aluminium disc of approximately 6" dia with a groove. It can be suspended by a steel wire provided at the centre of a long frame work. Supplied with four different shapes of masses (Rectangular, Square, Circular, Triangular).
Complete with Base, Stand, Pendulam, Weights

Price : Rs 0 eachSend Enquiry
 
   
   
 

Inertia Table weight Set 'Abron'

AP-752B

Spare set of triangle ball Cube cylinder etc NP or Painted

Price : Rs 0 eachSend Enquiry
 
   
   
 

Ingine Hause With 4 Metal

AP-745

Hot bath with rubber cork and different 4 metal rod for heat effect

Price : Rs 0 eachSend Enquiry
 
   
   
 

Iron Plate

Iron Plate Size Qty.
Made from iron sheet
with Brass Nut & Terminal
150 mm x 50mm,(6" x 2") 24 Swg Per Kg.
150 mm x 25mm,(6" x 1") 24 Swg Per Kg.

Price : Rs 0 eachSend Enquiry
 
   
   
 

Iron Rods

Iron Rods Size Qty.
Made from Pure Iron 8 mm x 130 mm Each

Price : Rs 0 eachSend Enquiry
 
   
   
 

Jagger's Apparatus 'Abron'

AP-755

To determine surface tension of water, complete Apparatus with Bottle and Tank etc

Price : Rs 0 eachSend Enquiry
 
   
   
 

Jouls Calorimeter Mechenical Equivalent

AP-756

With base stand rods and wheel and calorimeter

Price : Rs 0 eachSend Enquiry
 
   
   
 

Kater's Pendulum Brass Abron

AP-757-B

To measure acceleration due to gravity at a place. Steel rod of 120 cm long
and 0.1 cm dia capable of two adjustable knife edges facing each other. Two
metal weights (made of cast iron) of dimension7.5 x 3.75 cm (length x dia) and
3.5 cm x 3.75) respectively can be made of slide.Two wooden weights exactly
similar to metal weights which can be slide along the bar.

Price : Rs 0 eachSend Enquiry
 
   
   
 

Kater's Pendulum Iron Abron

AP-757A

To measure acceleration due to gravity at a place. Steel rod of 120 cm long
and 0.1 cm dia capable of two adjustable knife edges facing each other. Two
metal weights (made of cast iron) of dimension7.5 x 3.75 cm (length x dia) and
3.5 cm x 3.75) respectively can be made of slide.Two wooden weights exactly
similar to metal weights which can be slide along the bar.

Price : Rs 0 eachSend Enquiry
 
   
   
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | [«Back || | Next »] |
 

 
 
© All Rights Reserved ABRON- 2012-2020
Home | Company Profile | Products Gallery | Downloads | Faq | Enquiry | Contact Us