info@abronexports.com, info@abron.in
 
   
 
askaquestion
 
 

105 - Industrial Estate,
Ambala Cantt-133001,Haryana (India)

E-mail- info@abronexports.com

Click Here For More Details

Online Support
skypmsnfacebook
indiaflagglobe
 

Microprocessor

C |D |M |
1 |
 

Microprocessor 8051 Microcontroller Training Kit with LCD Display

AE-1305-31-51-LCD

SPECIFICATIONS

  • Based on 8051/89c52 Microcontroller.
  • On Board 32K RAM.
  • Battery backup for RAM area.
  • 64K bytes of EPROM with powerful monitor program.
  • 48 I/O lines using 2 nos. of 8255.
  • 3 channel progammable Timer/Counter using 8253.
  • Two External interrupts INT0 & INT1 from CPU.
  • IBM PC Compatible Keyboard for entering the program, editing and executing the progams.
  • 20 x 2 LCD (Liquid Crystal Display) is provided for display.
  • RS-232C interface using 8251.
  • One serial USART interface provided by 89C51/52.
  • All data, address and control signals (TTL compatible) available at FRC connector.
  • Powerful software commands like INSERT, DELETE, BLOCK MOVE, SET/CLEAR BREAK POINT, SINGLE STEP, EXAMINE/MODIFY REGISTER/MEMORY etc.
  • Provision for Microcontroller programmer for 89C51/52.
  • Power Supply requirement: +5V/1.2A, +/-12V/250mA
  • User's Manual & RS232C cable.

OPTIONAL :

  • Power Supply (AE-1305-PS-III): +5V/1.2A, +/-12V/250mA & 21V/24V/100mA
  • 8 Channel, 8 bit ADC using 0809.
  • Single channel, 8 bit DAC using 0800.
  • Real time clock
  • Programmer for 89C51/52.

ORDERING GUIDE

  • AE-1305-31/51LCD Kit & AE-1305-PS-III
  • AE-1305-31/51LCD P with built in power supply
  • Programmer for 89C51/52 on kit
  • ADC/DAC/Real time clock on kit.

Price : Rs 0 eachSend Enquiry
 
   
   
 

Microprocessor 8051-31 Microcontroller Training Kit

AE-1305-31-51

SPECIFICATIONS

  • Based on 8051/8031/89c51 operating at 10/12 MHz.
  • On Board 8K RAM.
  • Battery backup for RAM area.
  • 8/16K bytes of EPROM with powerful monitor program.
  • Total memory expandable upto 128K Bytes using four 28 pin sockets.
  • 48 I/O lines using 2 nos. of 8255.
  • Two External interrupts INT0 & INT1
  • 28 keys Hexadecimal Keyboard and six Seven Segment displays.
  • RS-232C interface using 8251.
  • Auxiliary RS-232C using serial pins of 80C31.
  • All data, address and control signals (TTL compatible) available at FRC connector.
  • Powerful Software Commands like INSERT, DELETE, BLOCK MOVE, SET/CLEAR BREAK POINT, SINGLE STEP, EXAMINE/MODIFY REGISTER/MEMORY, EXECUTE etc.
  • Uploading/Downloading facility to/from PC in Intel Hex format.
  • Power Supply requirement: +5V/1.2A, +/-12V/250mA, +21V/100mA
  • User's Manual & RS232C cable..

OPTIONAL :

  • Programmer for 89C51 & 89C52 Microcontroller using 40 pin ZIF with facility to Blank Check, Verify, Program, lock & List of 89c51 Microcontroller.
  • Power Supply (PS-III): +5V/1.2A, +/-12V/250mA & 24V/100mA
  • X51 Cross Assembler for 8031/8051.

ORDERING GUIDE

  • VMC-31/51 Kit & PS-III
  • VMC-31/51P with built in power supply
  • Programmer for 89C51 Microcontroller on kit
  • X51 Cross Assembler for 8031/8051.

Price : Rs 0 eachSend Enquiry
 
   
   
 

Microprocessor 8051/8031 Microcontroller Training Kit-cum-Emulator

AE-1305-ICE31/51

AE-1305-ICE31/51 is an 8-bit Microcontroller Training Kit cum Incircuit Emulator for microcontroller family 8051/8031/8751.AE-1305-ICE31/51 comprise four components: Microcontroller Kit, In-circuit Emulator Hardware, Symbolic Debugger & Cross Assembler. These components provide the Engineer with a complete microcontroller design tool set working with microcontroller family - a cost effective package that sets a new industry standard. This kit provides 8K byte of RAM (0000 to 1FFF) with onboard battery backup for preserving data stored in this address range after power is removed for up to one year. 8K byte of EPROM (C000 to DFFF) loaded with powerful monitor program. AE-1305-ICE 31/51 is also a Stand alone In-circuit Emulator that connects to the COM port of the PC via RS232 cable provided. The 40 pin POD and flat cable are used to connect the AE-1305-ICE 31/51 to the target system. The kit has onboard feature of A/D Converter using ADC 0809 and D/A Converter using DAC 0800.

SPECIFICATIONS

  • Based on 8051/8031 microcontroller operating at 10/12 MHz clock frequency..
  • Compatible with AE-1305-P-I, AE-1305-P-II, AE-1305-P-III, AE-1305-P-IV. (Only Vinytics make microcontroller kit with emulator is compatible with AE-1305-P-IV)
  • AE-1305-ICE 31/51 comprises four components :
    • Microcontroller Kit
    • Incircuit Emulator
    • MBUG Symbolic Debugger
    • MBUG Cross Assembler
  • 8K Emulation Memory expandable upto 48K with battery backup.
  • 8K byte of EPROM loaded with powerful monitor program.
  • 48 I/O lines using 2 nos. of 8255.
  • 16 bit timer/counter using 8253.
  • 32 keys and Six Seven Segment display.
  • 8 LEDs for displaying contents of registers and two LEDs for current emulation memory.
  • 8 channel 8 bit A/D Converter using ADC 0809.
  • Single channel D/A Converter using DAC 0800.
  • 40 pin Header with cable for connecting the target system.
  • RS232 port for serial communication with IBM-PC/XT?AT.
  • Uploading & Downloading of files to/from PC.
  • Onboard assembler/disassembler.
  • Power Supply requirement : +5V/1.2A, +/-12V/250mA
  • User's Manual, Cables & Connectors.

Onboard MBUG Symbolic Debugger
MBUG is a DOS-based application program that controls and interfaces with the VMC_ICE 31/51 Incircuit Emulator through the PC Serial port. MBUG can display and modify all registers, ports, special function registers (SFRs), INTERNAL DATA, BIT, Xternal DATA and memory. The display of registers and SFRs can be customised to the programmer's requirements. On-chip user program watch variables can be designed into the register window. Two types of break-points can be set and the break-point frequency can be set up to 25 repetations. Two single-step commands are also available. The line-assembler can be used to patch already loaded programs and a disassembler is also available.

OPTIONAL:

  • Power Supply (AE-1305-PS-III): +5V/1.2A, +/-12V/250mA & 24V/21v/100mA.
  • Emulator POD for 8751/EM8751/89C51 To use AE-1305-31/51 as Emulator for 8751/89C51.
  • Emulator POD for 89C2051/89C1051 To use AE-1305-31/51 as Emulator for 89C2051/89C1051.

ORDERING GUIDE

  • AE-1305-ICE31/51 Kit & AE-1305-PS-III
  • AE-1305-ICE31/51P with built in power supply
  • Emulator PODs for 89C51.

Price : Rs 0 eachSend Enquiry
 
   
   
 

Microprocessor 8085 - Microprocessor Kit cum In-circuit Emulator

AE-1305-ICE-8085

AE-1305-ICE8085 is an 8-bit Microprocessor Training kit cum Incircuit Emulatory for 8085 Microprocessor.
Provides the Engineer, a complete microprocessor designe tool set working with 8085 - in a cost effective package that sets a new industry standard. The monitor enables one to use AE-1305-ICE8085 through keyboard & display having 28 keys Hexadecimal keyboard & 6 Seven Segment Display. The 28 keys consists of 16 Hexadecimal keys, 11 Functional keys & 1 Hardware Reset key.
This kit provides 48K bytes of RAM (0000 to BFFF) with onboard battery backup for preserving data stored in this address range even after power is removed.
AE-1305-ICE8085 is also a Stand Alone In-Circuit Emulator that connects to the Serial port of the PC via RS-232 cable provided with the kit.

SPECIFICATIONS

  • Based on 8085 Microprocessor operating at 6.144 MHz clock frequency
  • AE-1305-ICE8085 comprises three components:
    • Microprocessor Kit
    • In-circuit Emulator
    • Cross Assembler
  • 48K Emulation Memory, RAM area starting from0000H
  • 8K bytes of EPROM with powerful monitor program.
  • 48 I/O lines using 2 nos. of 8255.
  • Three nos. of 16 bit Timer/Counter using 8253.
  • 28 keys Hexadecimal keyboard & 6 Seven Segment display.
  • On board battery backup for Emulation memory.
  • 40 Pin Header with cable for connecting the target.
  • RS-232C port for serial communication with PC.
  • Uploading/Downloading facility to/from PC.
  • Powerful software commands like Break point, Single Stepping, Auto Single Stepping, Go, Fill, Compare, Examine Memory, Assemble etc.
  • User's Manual, cable & connectors.
  • Power Supply requirements: +5V/1.2A, +/-12V/250mA, +24V/100mA.

ON BOARD ICE8085 CROSS ASSEMBLER:

AE-1305-ICE8085 has its own fast & efficient built-in Cross Assembler that can assemble a source file and produce a modified Hex file which can be downloaded to AE-1305-ICE8085.
The 40 pin POD and flat cable are use to connect the AE-1305-ICE8085 to the taget system.The Input/Output Structure provides 48 I/O lines using 8255. It has got 16 bit programmable Timer/Counter for generation of accuate time delay under software control.

Advantage of using AE-1305-ICE8085 kit over normal 8085 Microprocessor Training kit:5V/2.5A, +/-

Ram area from 0000H location onwards, so all software & Hardware interrupts can be taught as per 8085 Instructions.

Target program development & debugging starts from 0000H location and when development is over, can be directly loaded in the EPROM.

The AE-1305-ICE8085 kit can be directly connected to the CPU of the target board to test software & Hardware by wriing small programs for enabling students/users to understand the techniques of hardware and software testing.

POWER SUPPLY - AE-1305-PS- III (OPTIONAL)

  • 5V/1.2A, +/-12V/250mA, 24V/100mA, 21V/100mA

ORDERING GUIDE

  • AE-1305-ICE8085 Kit & AE-1305-PS-III
  • AE-1305-ICE8085P with built in power supply

Price : Rs 0 eachSend Enquiry
 
   
   
 

Microprocessor 8085 - Microprocessor Kit cum In-circuit Emulator

AE-1305-ICE-8085P

AE-1305-ICE8085 is an 8-bit Microprocessor Training kit cum Incircuit Emulatory for 8085 Microprocessor.
Provides the Engineer, a complete microprocessor designe tool set working with 8085 - in a cost effective package that sets a new industry standard. The monitor enables AE-1305-one to use AE-1305-ICE8085 through keyboard & display having 28 keys Hexadecimal keyboard & 6 Seven Segment Display. The 28 keys consists of 16 Hexadecimal keys, 11 Functional keys & 1 Hardware Reset key.
This kit provides 48K bytes of RAM (0000 to BFFF) with onboard battery backup for preserving data stored in this address range even after power is removed.
AE-1305-ICE8085 is also a Stand Alone In-Circuit Emulator that connects to the Serial port of the PC via RS-232 cable provided with the kit.

SPECIFICATIONS

  • Based on 8085 Microprocessor operating at 6.144 MHz clock frequency
  • AE-1305-ICE8085 comprises three components:
    • Microprocessor Kit
    • In-circuit Emulator
    • Cross Assembler
  • 48K Emulation Memory, RAM area starting from0000H
  • 8K bytes of EPROM with powerful monitor program.
  • 48 I/O lines using 2 nos. of 8255.
  • Three nos. of 16 bit Timer/Counter using 8253.
  • 28 keys Hexadecimal keyboard & 6 Seven Segment display.
  • On board battery backup for Emulation memory.
  • 40 Pin Header with cable for connecting the target.
  • Programmer for 27 series EPROMs with facility to blank Check, Verify, Program & Read can be operated in Both serial & stand alone mode.
  • RS-232C port for serial communication with PC.
  • Uploading/Downloading facility to/from PC.
  • Powerful software commands like Break point, Single Stepping, Auto Single Stepping, Go, Fill, Compare, Examine Memory, Assemble etc.
  • User's Manual, cable & connectors.
  • Power Supply requirements: +5V/1.2A, +/-12V/250mA, +24V/100mA.

ON BOARD ICE8085 CROSS ASSEMBLER:

AE-1305-ICE8085 has its own fast & efficient built-in Cross Assembler that can assemble a source file and produce a modified Hex file which can be downloaded to AE-1305-ICE8085.
The 40 pin POD and flat cable are use to connect the AE-1305-ICE8085 to the taget system.The Input/Output Structure provides 48 I/O lines using 8255. It has got 16 bit programmable Timer/Counter for generation of accuate time delay under software control.

Advantage of using AE-1305-ICE8085 kit over normal 8085 Microprocessor Training kit:5V/2.5A, +/-

Ram area from 0000H location onwards, so all software & Hardware interrupts can be taught as per 8085 Instructions.

Target program development & debugging starts from 0000H location and when development is over, can be directly loaded in the EPROM.

The AE-1305-ICE8085 kit can be directly connected to the CPU of the target board to test software & Hardware by wriing small programs for enabling students/users to understand the techniques of hardware and software testing.

POWER SUPPLY - AE-1305-PS- III (OPTIONAL)

  • 5V/1.2A, +/-12V/250mA, 24V/100mA, 21V/100mA

ORDERING GUIDE

  • AE-1305-ICE8085 Kit & AE-1305-PS-III
  • AE-1305-ICE8085P with built in power supply

Price : Rs 0 eachSend Enquiry
 
   
   
 

Microprocessor 8085 - Training Kit with PC Keyboard & Monitor

AE-1305-8509M

SPECIFICATIONS

  • Based on 8085 CPU operating at 6.144 MHz. crystal.
  • 8/32K bytes of RAM and space for further expansion.
  • 128KB RAM (optional).
  • 16K bytes of EPROM loaded with powerful monitor program, space for further expansion..
  • 3 nos. of 16 bit programmable timer/counter using 8253.
  • 48 I/O lines using two nos. of 8255. PPI.
  • 8 different level interrupts through 8259.
  • Six seven segment display.
  • 28 keys hexadecimal keyboard.
  • IBM PC compatible Keyboard.
  • Using 6845 CRT Controller along with character generator & Video RAM.
  • All data, address and control signals (TTL compatible) available at 50 pin FRC connector.
  • 14" Monochrome Monitor (optional).
  • EPROM Programmer for 27 series EPROMs.
  • Printer Interface.
  • Battery Backup for RAM.
  • RS-232C interface for CRT using SID/SOD lines.
  • Interrupt Controller using 8259.
  • 8 channel 8 bit ADC using 8259.
  • 1 channel 8 bit D/A using DAC 0800.
  • Real Time Clock.
  • Three modes of Commands:
    • Hex Key pad Mode
    • Serial Mode
    • CRT & ASCII Keyboard Mode.
  • On-board Single Line Assemble/Disassembler.
  • Facility for Downloading/Uploading files from/to PC.
  • Power Supply requirements: 5V/2.5A, +/-12V/250mA, +24V/21V/100mA
  • User's Manual.

POWER SUPPLY - AE-1305-PS- IV (OPTIONAL)

  • 5V/2.5A, +/-12V/250mA, +24V/21V/100mA

ORDERING GUIDE

  • AE-1305-8509M Kit & AE-1305-PS-IV
  • 14" Monochrome Monitor
  • PC Keyboard.

Price : Rs 0 eachSend Enquiry
 
   
   
 

Microprocessor 8085 Advance Microprocessor Trg. Kit with LCD

AE-1305-8509P

SPECIFICATIONS

  • Based on 8085 CPU operating at 6.144 MHz. crystal.
  • 16K bytes of EPROM with powerful monitor program.
  • 8K byte of RAM available to the user.
  • Total on board memory expansion upto 64K bytes using 2732/2764/27128.
  • 20x2 Liquid Crystal Display (LCD) with backlight.
  • 48 programmable I/O lines provided through two nos. of 8255.
  • 16 bit programmable timer/counter using 8253.
  • Additional serial port using 8251
  • Printer Interface.
  • EPROM Programmer for 27 series EPROM.
  • Battery backup for user's RAM with 3.6V rechargeable cell.
  • RS-232C interface for CRT using SID/SOD lines.
  • Interrupt Controller using 8259.
  • 8 channel 8 bit ADC using 0809.
  • 1 channel 8 bit DAC using 0800.
  • 1 Opto isolated input & 1 Relay Output.
  • Real Time Clock (optional).
  • 2 Modes of Commands:
    • Key board Mode
    • Serial Mode
  • All addresses, data and control lines are buffered and made available at 50 pin FRC connector as per STD Bus configuration.
  • Powerful Software Commands like Examine/Modify memory. Examine Register, Relocate, String, Fill, Insert, Delete, Block move, Memory Compare etc.
  • On-board Single Line Assemble/Disassembler.
  • 104 keys IBM PC compatible keyboard for programing, editing, debugging, execution etc.
  • Facility for Downloading/Uploading files from/to PC.
  • Power Supply requirements: 5V/1.5A, +/-12V/250mA, +24V/21V/100mA
  • User's Manual.

POWER SUPPLY - AE-1305-PS- III (OPTIONAL)

  • 5V/1.2A, +/-12V/250mA, +24V/21V/100mA

ORDERING GUIDE

  • AE-1305-8509M Kit & AE-1305-PS-III
  • AE-1305-8509P with built in power supply

Price : Rs 0 eachSend Enquiry
 
   
   
 

Microprocessor 8085 Microprocessor Training Kit

AE-1305-8501P

SPECIFICATIONS FOR AE-1305-8501

  • Based on 8085 CPU operating at 6.144 MHz crystal frequency.
  • 8/16K bytes of monitor & 8/16K bytes of RAM for user.
  • Total on board memory expansion upto 64K bytes.
  • 3 nos. of 16 bit programmable TIMER/COUNTER using 8253.
  • 24 programmable I/O lines provided through 8255.
  • RS-232C interface through SID/SOD Lines with Auto baud rate.
  • All address, data & control signal available at STD BUS.
  • 28 key hexadecimal keyboard and 6 seven segment displays.
  • On board Battery backup for RAM.
  • Power supply requirment: +5V/800mA.

ADDITIONAL SPECIFICATIONS IN AE-1305-8502

  • 22 programmable I/O lines provided through 8155.
  • Test Points for Interrupts, RD,WR & I/O/M.
  • Audio Interface (Optional).

ORDERING GUIDE

  • AE-1305-8502 kit & PS-II
  • AE-1305-8502P with built in power supply.
  • AE-1305-8501 kit & PS-II
  • AE-1305-8501P with built in power supply.

Price : Rs 0 eachSend Enquiry
 
   
   
 

Microprocessor 8085 Microprocessor Training Kit with Programmer

AE-1305-8503EP

SPECIFICATIONS

  • Based on 8085 CPU operating at 6.144 MHz crystal frequency.
  • 8/16K bytes of EPROM loaded with powerful monitor program.
  • 8/16K bytes of RAM available to the user.
  • Battery Backup for RAM with 3.6V rechargeable cell.
  • Total on board memory expansion upto 64K bytes.
  • Memory mapping definable by the user.
  • Three nos. of 16 bit programmable TIMER/COUNTER using 8253.
  • 48 programmable I/O lines provided through two nos. of 8255.
  • RS-232C interface for CRT Terminal with auto baud rate.
  • EPROM Programmer for 27 series EPROM with facility to Program, Verify, List & Blank Check.
  • Two modes of commands: Hex Key pad mode & Serial mode
  • All address, data & control lines are buffered and made available at 50 pin FRC connector as per STD bus configuration.
  • 28 key hexadecimal keyboard and six seven segment display through 8279.
  • Powerful software commands like Relocate, String, Fill, Insert, Delete, Block Move, Examine & Compare Memory, Examine Register, Insert Data, Delete Data, Single Step, Go, Break Point in both Serial and Keyboard mode.
  • On board Single Line Assembler and Disassembler.
  • Faclity for Downloading/Uploading files from/to PC.
  • Power supply requirement: +5V/1.2A, +/-12V/250mA, +24V/21V/100mA
  • User's Manual.
  • Onboard 8 bit 8 channel ADC (Optional).
  • Onboard 8 bit 1 channel DAC (Optional).

POWER SUPPLY - AE-1305-PS-III (Optional)

  • +5V/1.2A, +/-12V/250mA, +24V/21V/100mA

ORDERING GUIDE

  • AE-1305-8503 Kit (without Programmer) & AE-1305-PS-III
  • AE-1305-8503P with built in power supply.
  • AE-1305-8503E with EPROM programmer & AE-1305-PS-III
  • AE-1305-8503EP with EPROM Programmer & built in power supply.

Price : Rs 0 eachSend Enquiry
 
   
   
 

Microprocessor 8085 Microprocessor Training Kit with Programmer

AE-1305-8506P

SPECIFICATIONS

  • Based on 8085 CPU operating at 6.144 MHz crystal frequency.
  • 16k bytes of EPROM loaded with powerful monitor program.
  • 8/16k byte of RAM available to the user.
  • Total on board memory expansion upto 6k bytes.
  • Six seven segment Hexadecimal display
  • Printer Interface.
  • 28 Computer graded keys: 16 hexadecimal keys and 10 for programming, editing, debugging, execution etc., 1 reset key and 1 key for vector interrupt.
  • 48 programmable I/O lines using two nos. of 8255 (PPI).
  • 3 nos. o f16 bit programmable timer/counter using 8253.
  • EPROM Programmber for 27 series EPROMs.
  • Real Time Clock Using 6242 (Optional)
  • Battery backup for RAM using 3.6V rehcargeable battery.
  • RS-232C interface for CRT using SID/SOD lines.
  • Additional serial port using 8251.
  • Interrupt Controller using 8259.
  • 8 Channel 8 bit ADC using 0809.
  • 1 Channel 8 bit DAC using DAC 0800.
  • 1 Opto isolated input & 1 Relay output.
  • 2 modes of Commands:
    • Hex Key Mode
    • Serial Mode
  • Powerful Software Commands like Examine/Modify memory, Examine register, Relocate, String, Fill, Insert, Delete, Block move, Memory compare etc.
  • Onboard Single Line Assemble/Disassembler.
  • Facility for Downloading/Uploading files from/to PC.
  • Power supply requirement: 5V/1.2A,+/-12V/250mA, +24V/21V/100mA
  • User's Manual.

POWER SUPPLY - AE-1305-PS-III (Optional)

  • +5V/1.2A,+/-12V/250mA & 24V/21V/100mA.

ORDERING GUIDE

  • AE-1305-8506 Kit & AE-1305-PS-III.
  • AE-1305-8506P with built in power supply.

Price : Rs 0 eachSend Enquiry
 
   
   
 

Microprocessor 8085 Training System with LCD Display

AE-1305-85P

SPECIFICATIONS

  • Based on 8085, 8 bit Microprocessor.
  • Total On-board Memory capacity of 64K byrtes.
  • 8K bytes of EPROM loaded with powerful monitor program.
  • 8/32KB RAM with Battery back-up using 3.6V rechargable battery.
  • 24 I/O lines using 8255.
  • 16 bit, 3 channel Timer/Counter using 8253.
  • Display : 16x1 LCD.
  • Keyboard : 28 Keys Hex Keyboard.
  • RS.232C interface through SID/SOD lines with auto baud rate.
  • Facility to Upload/Download programs to/from PC.
  • In-built power supply.
  • All data, address & control signals are available at 50 pin FRC connector as per STD cus configuration.

OPTIONAL

  • Power Supply AE-1305-PS-II :+5V/1A, +/-12V/200mA.
  • Power Supply AE-1305-PS-III : +5V/1.2A, +/-12V/250mA, 21V/24V/100mA.
  • X8085 Cross Assembler for 8085.
  • Hardware Manual gives details about 8085 & other Peripherals/Memory Chips.
  • Laboratory Manual gives Doftware experiments as well as Hardware experiments to be performed with interfacing Modules and experiments with various peripheral chips like 8253, 8279 and 8251.
  • Interfacing Modules & Peripherals Study Cards. Mini projects to interface with I/O lines and study cards to understand the working of peripheral IC's.

Price : Rs 0 eachSend Enquiry
 
   
   
 

Microprocessor 8085 Training System with LCD Display

AE-1305-85PC

SPECIFICATIONS

  • Based on 8085, 8 bit Microprocessor.
  • Total On-board Memory capacity of 64K byrtes.
  • 8K bytes of EPROM loaded with powerful monitor program.
  • 8/32KB RAM with Battery back-up using 3.6V rechargable battery.
  • 24 I/O lines using 8255.
  • 16 bit, 3 channel Timer/Counter using 8253.
  • Display : 16x1 LCD.
  • Keyboard : IBM PC Compatible ASCII Keyboard.
  • RS.232C interface through SID/SOD lines with auto baud rate.
  • Facility to Upload/Download programs to/from PC.
  • On board Assembler/Disassembler.
  • In-built power supply.
  • All data, address & control signals are available at 50 pin FRC connector as per STD cus configuration.

OPTIONAL

  • Power Supply AE-1305-PS-II : +5V/1A, +/-12V/200mA.
  • Power Supply AE-1305-PS-III : +5V/1.2A, +/-12V/250mA, 21V/24V/100mA.
  • X8085 Cross Assembler for 8085.
  • Hardware Manual gives details about 8085 & other Peripherals/Memory Chips.
  • Laboratory Manual gives Doftware experiments as well as Hardware experiments to be performed with interfacing Modules and experiments with various peripheral chips like 8253, 8279 and 8251.
  • Interfacing Modules & Peripherals Study Cards. Mini projects to interface with I/O lines and study cards to understand the working of peripheral IC's.

Price : Rs 0 eachSend Enquiry
 
   
   
 

Microprocessor 8086 Training Kit with PC Keyboard & 14

AE-1305-8609M

SPECIFICATIONS

  • Based on Intel's 8086/8088 CPU operating at 2.5/5 MHz.
  • 8086 Processor can be replaced by 8088 Processor.
  • Onboard sockets provided to facilitate the use of 8087 Co-processor and 8089 I/O Processor.
  • 64 K bytes of RAM available to the user using 62256.
  • 32K bytes of EPROM loaded with powerful monitor program.
  • Total on board memory capacity of 128K bytes of RAM and 128K bytes of EPROM.
  • Supports MASM (Macro Assembler).
  • Battery backup provided for RAM area.
  • 72 I/O lines through 3 nos. of 8255 available on 26 pin FRC connector.
  • 16 bit Timer/Counter through 8253.
  • RS-232C for CRT Terminal through 8251. Baud rate selection through DIP switch from 110-19,200 baud.
  • 28 keys hexadecimal keyboard and eight even segment displays.
  • Display Controller 80x25 characters.
  • 14" Monochrome Monitor (Optional).
  • 101 keys IBM PC Compatible Keyboard.
  • Two modes of Commands:
    • Hex Key pad Mode
    • Serial mode
  • Powerful software commands like GO, EXAMINE/MODIFY REGISTERS/MEMORY, SINGLE STEPPING, BLOCK MOVE, FILL, INSERT, DELETE etc.
  • Onboard Assembler & Disassembler.
  • Facility for uploading/downloading files from/to PC.
  • All address, Data and control Signals, are buffered and available at the FRC connector.
  • Power Supply requirements: +5V/1.5Amp, +/-12V/250mA, +21V/24V.
  • User's Manual.

OPTIONAL:

  • Power Supply (AE-1305-PS-IV): +5V/2.5A, +/-12V/250mA & 24V/21V/100mA
  • Interfacing Modules & Peripherals Study Cards.

Price : Rs 0 eachSend Enquiry
 
   
   
 

Microprocessor 8086/88 Advanced Microprocessor Training Kit

AE-1305-8603AD

SPECIFICATIONS

  • Based on Intel's 8086/8088 CPU operating at 2.5/5 MHz.
  • 8086 Processor can be replaced by 8088 Processor.
  • Onboard sockets provided to facilitate the use of 8087 Co-processor and 8089 I/O Processor.
  • 16 K bytes of RAM available to the user.
  • 16K bytes of EPROM loaded with powerful monitor program.
  • Battery backup provided for RAM area.
  • 48/72/ I/O lines.
  • 16 bit Timer/Counter through 8253.
  • RS-232C for CRT Terminal through 8251.
  • Provision for EPROM Programmer for 2764/27128/27256 with 28 pin ZIF with facility to Program Verify, List & Blank Check for Even, Odd & Continuous bytes.
  • 28 keys hexadecimal keyboard and 8 even segment display.
  • Resident Monitor with two modes of operation:
    • Keyboard mode
    • Serial mode
  • Faclity for uploading/downloading of files to/from PC.
  • Onboard Assembler & Disassembler.
  • All address, Data and control Signals, are buffered and available at the FRC connector.
  • Power Supply requirements: +5V/1.2A, +/-12V/250mA, +24V
  • User's Manual.

ADDITIONAL SPECIFICATIONS IN AE-1305-8603AD

  • 8 bit, 8 channel A/D Converter using ADC 0809.
  • 8 bit, 1 channel D/A Converter using DAC 0800.
  • Power Supply (AE-1305-PS-III): +5V/1.2A, +/-12V/250mA, 24V/21V/100mA (Optional) for AE-1305-8603 & AE-1305-8603AD.
  • Interrupt Controller (Optional) for AE-1305-8603 & AE-1305-8603AD.

ORDERING GUIDE

  • AE-1305-8603 Kit & AE-1305-PS-IV
  • AE-1305-8603P with built in power supply.
  • AE-1305-8603AD Kit & AE-1305-PS-IV
  • AE-1305-8603ADP with built in power supply.

Price : Rs 0 eachSend Enquiry
 
   
   
 

Microprocessor 8086/88 Microprocessor Training Kit with LCD Display

AE-1305-8609AD

The AE-1305-8609 & AE-1305-8609AD is an advanced 16 bit Mocroprocessor Trainer based on 8086/8088 CPU having ASCII Keyboard and LCD Display providing the user to enter program directly in assembly and debugging commands similar to IBM PC debug commands.

SPECIFICATIONS OF AE-1305-8609

  • Based on 8086 or 8088 Microprocessor.
  • Can be used in minimum or maximum mode.
  • Onboard Assembler & Disassembler.
  • 32K bytes of EPROM Loaded with monitor expandable to 64K Bytes using 27256.
  • 32K bytes of CMOS RAM expandable to 64K Bytes.
  • 24 I/O lines using 8255.
  • 8 different level interrupt through 8259.
  • Three 16 bit Timer/Counter through 8253.
  • IBM PC compatible keyboard.
  • 20x2 Liquid Crystal Display.
  • Parallel Printer Interface with Disassembler listing.
  • Real Time Clock (Optional).
  • RS-232C Port using 8251.
  • Buzzer for self testing.
  • Supports MASM (Macro Assembler).
  • All address, data and control signals available at 50 pin FRC.
  • Power Supply requirements: 5V/1.2A.
  • User's Manual.

ADDITIONAL SPECIFICATIONS IN AE-1305-8609AD

  • Expansion upto 256K bytes of EPROM.
  • Expansion upto 256K bytes of RAM for user.
  • 72 I/O lines using three nos. of 8255.
  • 8 channel 8 bit ADC, Single channel 8 bit DAC.
  • Real time clock (Optional).
  • EPROM Programmer (Optional).
  • Onboard sockets provided to facilitate the use of 8089 I/O processor & 8087 Numeric Data Processor.
  • Power Supply (AE-1305-PS-III): +5V/1.2A, +/-12V/250mA, 24V/21V/100mA (Optional) for AE-1305-8609& AE-1305-8609A.

ORDERING GUIDE

  • AE-1305-8609 Kit & PS-III
  • AE-1305-8609P with built in power supply.
  • AE-1305-8609AD Kit & AE-1305-PS-III
  • AE-1305-8609ADP with built in power supply.

Price : Rs 0 eachSend Enquiry
 
   
   
 

Microprocessor Interfacing Modules

The Interfacing Modules can be connected to the lines of any 8/16 bit Microprocessor/Microcontroller Training kit offered by Vinytics to perform the experiments in the laboratory. This helps in learning about real time interfacing problems of the Microprocessors/microcontroller.
All Microprocessor/Microcontroller training kits offered by Vinytics can be connected to these modules through 26 pin FRC cable.

AE-1305-ADC ADC Interface
This interface consists of 8 bit analog to digital converter uses successive approximation method for conversion, 8 LED’s are provided to display the digital value of analog input.

AE-1305-ADC0809 ADC-0809 Interface
Uses 8 bit ADC-0809 monolithic CMOS device with in-built 8 channel multiplexer. 8 LED’s are provided to display the digital value of the input analog signal (optional). The complete operation of A/D converter chip can be understood using this card.

AE-1305-DAC Daul DAC Interface
Consists of two independent 8 bit digital to analog converter alongwith a stable regulated voltage source using 723 regulator. The current output of DAC are converted to voltage using operational amplifies.

AE-1305-LC Logic Controller Interface
The logic controller interface provides the user 8 TTL buffered outputs & input. The logic state of each input & output is indicated by LED. This module can be effectively used to teach 8255 in input & output modes. It can also simulate ladder networks.

AE-1305-ES Elevator Simulator
This interface simulates the control operation of an elevator. The elevator is considered to function within a building having 4 floors. A key & corresponding LED indicator serves as request button & request status indicator. The LED’s also indicate the position of the elevator within the shaft.

AE-1305-ICT IC Tester Interface
The interface explain the working of IC testers for 14 pin or 16 pin digital IC’s with the help of micro processor. Three personality modules are to be inserted in three different sockets for the IC under test. A socket is provided for inserting the IC to be tested.

AE-1305-DI Display Interface
A Four digit display using shift registers can be obtained on this module. This module has the capability to display in any combination. The display can be from right to left or left to right. A delay can be put between two display.

AE-1305-SMC Stepper Motor Controller Interface
This module can control Stepper Motor in three parameters such as direction, speed & number of steps. It has got driver transistors for driving all the phases of the motor. The interface is useful for robotics & control applications.

AE-1305-SM Stepper Motors

Torque
Kg.-cm
Max. Speed
RPM
Steps
Degree
Volts/
Amps
0.25
100
7.5
5V/250mA
3
50
1.8
5V/1.5A
6
40
1.8
12V/3A
10
25
1.8
12V/4.5A

AE-1305-KB Keyboard Interface
A Calculator style keyboard consisting of the keys 0 to 9, *, +, -, /, C, CE and two user definable keys, allowing the user to study a number of techniques used in keyboard interface like software deboucing, two key lock out and keyboard encoding & pausing.

AE-1305-LCD LCD Display Interface
A 16x1 Liquid Crystal Display using shift registers can be obtained on this module. This module has the capability to display in any combination. The display can be from right to left or left to right. A delay can be put between two display.

AE-1305-TLC Traffic Light Controller Card
The Traffic Light Controller Card has RED, YELLOW & GREEN LED’s to demonstrate the use of Microprocessor in controlling the traffic movement under the control of program. It is a good example of use of Microprocessor in common applications.

AE-1305-Temp Temperature Measurement Card
Sensor to measure temperature upto 100oc, alongwith room temperature compensation and amplifier with output of 0-5V corresponding to the temperature.

AE-1305-DC DC Motor Controller Card
The AE-1305-DC card can control the speed of DC motor alongwith its direction under the control of the software programme.

AE-1305-ROC Relay & Opto Copuler Card
The AE-1305-ROC has four channel Relay & Opto coupler to demonstrate how I/O lines can be used to energise the relay and opto coupler to sense the input providing isolation.

AE-1305-LED LED Display Matrix Card
The AE-1305-LED has a matrix of 8 x 8 LED’s and is a module to demonstrate for displaying any character within the matrix. This is a small model of the display boards widely used in today’s world.

AE-1305-TWSC Thumb Wheel Switch Card
The AE-1305-TWSC has two nos. of Thumb Wheel Switches which can e read through I/O lines normally used in industrial controllers.

AE-1305-ADDA 12bit ADC Interface Card
This interface consists of 8 Channel 12 bit AD574 device with 15 microseconds conversion timer. Both unipolar & bipolar operations are possible. This module can be used where 12 bit conversion is required for better accuracy and resolution of ADC.


Price : Rs 0 eachSend Enquiry
 
   
   
 

Microprocessor MSC Training Board for AE-1305-ICE31/51 Kit

AE-1305-MSC

MSC Taining Board can be connected to AE-1305-ICE31/51 (In-Circuit Emulator cum Training Kit) through header cable.User can learn in depth about the port drivers of 8051/31 series.

SPECIFICATIONS

  • Stepper Motor: control of stepper motor in all parameters such as direction, speed and no. of steps.
  • ADC: 8 bit Analog to Digital Conversion using successive approximation technique for A to D conversion.
  • Speaker: how to generate the beep through I/O port.
  • Dot Matrix FND.
  • Working of sliding switches, Push button & LED.
  • User's Manual, Cable & Connectors.

Price : Rs 0 eachSend Enquiry
 
   
   
 

Microprocessor Study Modules

The Study Modules can be connected to the STD BUS of any 8/16 bit Microprocessor/Microcontroller Training kit offered by Vinytics to perform the experiments in the laboratory. This helps in learning about real time interfacing problems of the Microprocessors/Microcontrollers. All Microprocessor/Microcontroller taining kits offered by Vinytics can be connected to these modules through 50 pin FRC cable.

AE-1305-8212 Memory Decoder Study Card
The Study Card based on 8212 helps to understand the function of decoder.

AE-1305-8251 USART Study Card
This Study card helps to understand the functions of Universal Synchronous/Asynchronous Receiver Transmiter. LED’s are providing for different signals like chip select, Data Bust, Read/Write, etc.

AE-1305-8253 Programmable Timer Study Card
This study card enables the user to understand the operation in all six modes of programmable timer/counter chip (8253) LED’s are provided for different signals like Chip Select, Data Bus, Read/Write etc.

AE-1305-8255 PPI Study Card
This study card helps to understand the working of the Programmable peripherals interface chip in various modes. LED’s are provided for different signals like Read/Write, A1, A1, Data Bus, Chip Select and all ports etc.

AE-1305-8237/8257 DMA Study Card
This study card helps to understand the working of Direct Memory Access chip in different modes. LED’s are provided for different signals like Data Bus, Address Bus (A3-A0), TC, HRQ, AEN, IR, IW, MR, MW, CS etc.

AE-1305-8259 PIC Study Card
This study card helps to understand the working of programmable interrupt controller. LED’s are provided for different signals like Data Bust, Read, Write, INTA, A0, CS etc.

AE-1305-8279 Keyboard Display Controller Study Card
This study card helps to understand the working of keyboard/display controller. LED’s are provided for different like Data Bus, Read, Chip Select, A0, INT etc.

AE-1305-8155 PPI with Timer Study Card
This study card helps to understand the working of programmable peripherals interface chip with time & RAM, LED’s are provided for different signals like Data Bus, Chip Select, Read, Write, A0, A1 and all ports etc.

AE-1305-6264/62256 RAM Study Card
This study card helps to understand the working of Random Access Memory (RAM) 6264. LED’s are provided for different signals like Data Bus, Read, Write, Chip Select etc.

AE-1305-373 Latch Study Card
This study card helps to understand the working of chip used for latching the address. LED’s are provided for Data Bus to enable the user to know which data is present on input/output.

New arrivals in interfacing modules

31/2 Digit ADC Card
This interfacing cards uses ICL 7107 31/2 digit A/D converter with 0-2V input to be displayed on the microprocessors.

Sound/Speaker Card
This interfacing cards uses clock generated from 8253 timer to generate different frequencies on to the speaker.

Printer Interface Card
This interfacing cards uses 8255 of the Microprocessor/Microcontroller to print output on to the printer.


Price : Rs 0 eachSend Enquiry
 
   
   
 

Microprocessor Two in one Microcontroller Training Kit

AE-1305-8097-80196

AE-1305-8097/80196 Kit is based on MSC-96 family Microcontrollers designed to provide ease in interaction with 16 bit micro-controller with high speed I/Q, 10 bit A/D Convertor, Pulse Width Modulated D/A output with full duplex serial pors suitale for various Industrial and Real Time Applications.

SPECIFICATIONS

  • CPU Based on 8097BH or 80C196KC/80c196KB Microcontroller Operating at 12MHz.
  • 16K bytes of RAM expandable to 32K. On board Battery Backup with 3.6v rechargeable Battery.
  • 16K bytes of EPROM expandable to 32K loaded with powerful monitor.
  • On board Assembler/Disassembler.
  • 24Parallel I/O lines using 8255 and 8 buffered lines from 8097.
  • 1 input port software programmable to be 8 bit digital input pot or 8 analog channels with 10 bit A/D Converter and sample & hold with a 24 (*U)sec.(for 12MHz Cystal) conversion time using successive approximation for conversion.
  • RTC & Watch-Dog timer & Serial port from the controller.
  • High speed I/O (HSIO) port with 8 lines. Four lines dedicated as O/P, two lines dedicated as input, and two either as I/P or O/P.
  • Two 16 bit timers (one with external clock input).
  • Cross Assembler for 80196/8097.
  • 28 Keys & 8 Seven Segment displays.
  • Facility of Uploading/Downloading files from PC.
  • EPROM Programmer for 2764/27128/27256.
  • Power Supply requirement: +5V/1.2A, +/-12V/250mA, +24V/12V/100mA.
  • User's Manual & RS232C cable.

OPTIONAL :

  • Power Supply (AE-1305-PS-III): +5V/1.2A, +/-12V/250mA & 24V/21V/100mA

ORDERING GUIDE

  • AE-1305-8097/80196 Kit & AE-1305-PS-III
  • AE-1305-8097/80196P with built in power supply

Price : Rs 0 eachSend Enquiry
 
   
   
1 |
 

 
 
© All Rights Reserved ABRON- 2012-2020
Home | Company Profile | Products Gallery | Downloads | Faq | Enquiry | Contact Us