info@abronexports.com, info@abron.in
 
   
 
askaquestion
 
 

105 - Industrial Estate,
Ambala Cantt-133001,Haryana (India)

E-mail- info@abronexports.com

Click Here For More Details

Online Support
skypmsnfacebook
indiaflagglobe
 

Pharmacy & Pharmacology etc

A |B |C |D |E |F |H |I |J |K |M |O |P |R |S |T |U |V |W |Y |
1 |
 

Disintegration Double Basket Abron

APH-2530

The test equipment work on up and down movement of tablet in medium of
water kept at 370C. Built in a steel cabinet of 17"x12"x9" high which housed
a geared motor for the vertical-shaft drive the shaft moves up and down by
50 to 60 mm at speed of 28-32 strokes per minute.

On the upper end of the-shaft fitted a horizontal strip with clamp on either side. These clamps hold glassvessels open-at both ends and with stainless steel wire gauge with rubber rings-at the lower end, which dips in water.

Two independently thermostaticallycontrolled hot plate rating 65 watt are fixed on the top of the cabinet upon-which beakers of 1000 ml size are placed filled with water. Temperature ismaintained at 37°C with and accuracy of 10C.

Independent switches withneon indicators for motor hot plates are fitted on a panel. Mains fuse with two-meters mains cord and plug provided. Work on 220 volts A.C. mains.


Price : Rs 0 eachSend Enquiry
 
   
   
 

Disintegration Rate Test Apparatus Digital Abron

APH-2531

The test equipment work on up and down movement of tablet in medium of
water kept at 370C. Built in a steel cabinet of 17"x12"x9" high which housed
a geared motor for the vertical shaft drive the shaft moves up and down by
50 to 60 mm at speed of 28-32 strokes per minute.

On the upper end of the-shaft fitted a horizontal strip with clamp on either side. These clamps hold glass-vessels open at both ends and with stainless steel wire gauge with rubber rings-at the lower end, which dips in water.

Two independently thermostatically-controlled hot plate rating 65 watt are fixed on the top of the cabinet upon-which beakers of 1000 ml size are placed filled with water. Temperature is-maintained at 37°C with and accuracy of 10C.

Independent switches with-neon indicators for motor hot plates are fitted on a panel. Mains fuse with two-meters mains cord and plug provided. Work on 220 volts A.C. mains.


Price : Rs 0 eachSend Enquiry
 
   
   
 

Disintegrator Motor Driven

APH-2661

Laboratory Size, hammer type with HP heavy duty motor (single phase) 220 volts, 50C/s AC consisting of four steel hammers fixed to a disc of 3" in dia 1" thick through which passes a shaft being revolved at 3000 RPM

The hammers are enclosed in a CI drum, the sides and upper surface of which are roughened in a CI drum, the sides and upper surface of which are roughned The inner surface is undulating

The lower part of drum is made of chrome plated brass and is detachable so that SS sieves of different mesh size (a set of three sieves of coarse, medium & fine) supplied with the instrument can be easily placed Hopper is made of die casted aluminium, built on angle iron frame


Price : Rs 0 eachSend Enquiry
 
   
   
 

Disintegrator Test Apparatus Big Motorised Abron

APH-2532

The test equipment work on up and down movement of tablet in medium of water kept at 37C. Built in a steel cabinet of 17"x12"x9" high which housed a geared motor for the vertical shaft drive the shaft moves up and down by 50 to 60 mm at speed of 28-32 strokes per minute.
On the upper end of the-shaft fitted a horizontal strip with clamp on either side. These clamps hold glass-vessels open at both ends and with stainless steel wire gauge with rubber rings-at the lower end, which dips in water.
Two independently thermostatically-controlled hot plate rating 65 watt are fixed on the top of the cabinet upon-which beakers of 1000 ml size are placed filled with water. Temperature is-maintained at 37'C with and accuracy of 10C.
Independent switches with-neon indicators for motor hot plates are fitted on a panel. Mains fuse with two-meters mains cord and plug provided. Work on 220 volts A.C. mains.


Price : Rs 0 eachSend Enquiry
 
   
   
 

Disintegrator Test pulverizer Motorised Medium Abron

APH-2533-02

with motor on base

with cutter


Price : Rs 0 eachSend Enquiry
 
   
   
 

Disintegrator Test pulverizer Motorised Small Abron

APH-2533-01

with motor on base

with different sieves


Price : Rs 0 eachSend Enquiry
 
   
   
 

Dispensing Balance Abron

APH-2621 (AC-264)

Chemicals or small objects up to 100 gm can be weighed to within 15 mg with this economical model. The brass beam support is mounted on the wooden base (sunmica top) equipped with a drawer for holding weights and other equipments. Without weights. AC-264-A -Capacity 50 gms.
AC-264-B Capacity 100 gms


Price : Rs 0 eachSend Enquiry
 
   
   
 

Dissolution Rate Test Apparatus Single Basket Abron

APH-2534

The apparatus consists of 4 parts. A water bath with 500 watt heater covered-1000 mI. vessel made from Borosil glass and temperature control. Variable-speed motor, with 30cms longs stainless steel shaft.
A cylindrical stainless steel-basket and a membrane fixing attachment, water bath is made of imported thick-Acrylic sheet with transparent cover at top. Temperature of the bath is maintained-at 37'C with an accuracy of 1'C.A cylindrical glass vessel of 1000 ml.-capacity with slightly concave bottom has a flenged edge at the top to accept a fitted-cover having four holes.
One hole placed in the centre. The shaft of the motor is fitted-on an up right and has an electronic speed regulating device that allows the speed to-be varied from 25 to 250 R.P.M. The shaft is 6 mm dia. 30 cms on with basket fitted-at end rotates smoothly and without any significant wobble.
The basket consist of two parts one of which is attached to the shaft. It is of solid metal except for 2 mm vent and-is screwed on the main shaft.Lower part of the basket is held with this part by means-of threading and this allows proper removal of lower part for introduction of the test samples.
The detachable part of the basket is fabricated of stainless steel mesh formed-into cylinder of size 36 mm x 25 mm dia. The equipment is workable on 220 volts-50 C/S A.C. but Analog type double,three & Six Stage.
Price : Rs 0 eachSend Enquiry
 
   
   
 

Dissolution Rate Test Apparatus Three Stage Abron

APH-2536

The apparatus consists of 4 parts. A water bath with 500 watt heater covered 1000 mI. vessel made from Borosil glass and digital temperature control. Variable speed motor, with 30cms longs stainless steel shaft. A cylindrical stainless steel basket and a membrane fixing attachment, water bath is made of imported thick Acrylic sheet with transparent cover at top. Temperature of the bath is maintained at 37°C with an accuracy of ±1° C.A cylindrical glass vessel of 1000 ml. capacity with slightly concave bottom has a flenged edge at the top to accept a fitted cover having four holes. One hole placed in the centre. The shaft of the motor is fitted on an up right and has an electronic speed regulating device that allows the speed to be varied from 25 to 250 R.P.M. The shaft is 6 mm dia. 30 cms on with basket fitted at end rotates smoothly and without any significant wobble. The basket consist of two parts one of which is attached to the shaft. It is of solid metal except for 2 mm vent and is screwed on the main shaft.Lower part of the basket is held with this part by means of threading and this allows proper removal of lower part for introduction of the test samples. The detachable part of the basket is fabricated of stainless steel mesh formed into cylinder of size 36 mm x 25 mm dia. The equipment is workable on 220 volts 50 C/S A.C. but Analog type single stage.


Price : Rs 0 eachSend Enquiry
 
   
   
 

Dissolution Rate Test Apparatus Two Stage Abron

APH-2535

The apparatus consists of 4 parts.A water bath with 500 watt heater covered-1000 mI. vessel made from Borosil glass and digital temperature control. Variable-speed motor, with 30cms longs stainless steel shaft.A cylindrical stainless steel-basket and a membrane fixing attachment, water bath is made of imported thick-Acrylic sheet with transparent cover at top. Temperature of the bath is maintained-at 37°C with an accuracy of ±1° C.A cylindrical glass vessel of 1000 ml.capacity with slightly concave bottom has a flenged edge at the top to accept a fitted-cover having four holes.One hole placed in the centre. The shaft of the motor is fitted-on an up right and has an electronic speed regulating device that allows the speed to-be varied from 25 to 250 R.P.M. The shaft is 6 mm dia. 30 cms on with basket fitted-at end rotates smoothly and without any significant wobble.The basket consist of two parts one of which is attached to the shaft. It is of solid metal except for 2 mm vent and-is screwed on the main shaft.Lower part of the basket is held with this part by means-of threading and this allows proper removal of lower part for introduction of the test samples.The detachable part of the basket is fabricated of stainless steel mesh formedm-into cylinder of size 36 mm x 25 mm dia.The equipment is workable on 220 volts50 C/S A.C. but Analog type double,three & Six Stage.

APH-2535 Analogue Model

APH-2535D Digital Model


Price : Rs 0 eachSend Enquiry
 
   
   
 

Dissolution Six Stage Jar Test Apparatus Abron

APH-2538

The apparatus consists of 4 parts. A water bath with 500 watt heater covered 1000 mI. vessel made from Borosil glass and digital temperature control. Variable speed motor, with 30cms longs stainless steel shaft. A cylindrical stainless steel basket and a membrane fixing attachment, water bath is made of imported thick

Acrylic sheet with transparent cover at top. Temperature of the bath is maintained at 37°C with an accuracy of ±1° C.A cylindrical glass vessel of 1000 ml. capacity with slightly concave bottom has a flenged edge at the top to accept a fitted cover having four holes. One hole placed in the centre. The shaft of the motor is fitted on an up right and has an electronic speed regulating device that allows the speed to be varied from 25 to 250 R.P.M. The shaft is 6 mm dia. 30 cms on with basket fitted at end rotates smoothly and without any significant wobble.

The basket consist of two parts one of which is attached to the shaft. It is of solid metal except for 2 mm vent and is screwed on the main shaft.Lower part of the basket is held with this part by means of threading and this allows proper removal of lower part for introduction of the test samples. The detachable part of the basket is fabricated of stainless steel mesh formed into cylinder of size 36 mm x 25 mm dia.

The equipment is workable on 220 volts 50 C/S A.C. but analog type double,three & Six Stage.


Price : Rs 0 eachSend Enquiry
 
   
   
1 |
 

 
 
© All Rights Reserved ABRON- 2012-2020
Home | Company Profile | Products Gallery | Downloads | Faq | Enquiry | Contact Us