info@abronexports.com, info@abron.in
 
   
 
askaquestion
 
 

105 - Industrial Estate,
Ambala Cantt-133001,Haryana (India)

E-mail- info@abronexports.com

Click Here For More Details

Online Support
skypmsnfacebook
indiaflagglobe

 

Bulk Chemicals

P |Q |
1 |
 

POP Crack Filler Powder

Product Information

Our manufactured joint finish compound is superior in quality and a ready to mix compound for diverse applications. It can be used to repair cracks in plastered walls in order to texture surfaces & to laminate a wallboard in to the other wallboard. Our manufactured joint finish compound contains enough binder to secure the reinforcing tape and to develop its strength & hardness by drying.

The main advantages with our joint finish compound are:

Equipped with excellent adhesion/bond.
Ready to use straight from the container.
All sort of finishing can be done with just one compound.
Can be stored for a longer period of time then the usual joint finish compounds.
Easily available and efficient to use.
Shows excellent adhesive qualities in its application.

Our joint finish compound is durable and long lasting, and is available with us at an affordable price.


Price : Rs 0 eachSend Enquiry
 
   
   
 

POP Ready Mix POP

Product information

Our ready mixplasteris a fine qualityPlasterof Paris mix specially made to give a superior finish to the interior walls. A premix single applicationplaster, it is made of calcium hemihydrates and additives are added to it to improve the performance and workability. Ready mixplasterworks effectively on both even and uneven backgrounds, which means that this ready mix can be used for both fine surface finishing and thick base plastering as per the requirements.

The ready mix is very economical as it covers more area with less material as it is a superfine low density powder.

Is gypsum based product ideally apply directly to brick, concrete and blocks .It has formulated with special fibre adhesive for remarkable strength and high end design .Brick solution is new age gypsum plaster which has been developed through intensive research and experiment to bring best possible gypsum product in the market. It has value added feature of fire protection, sound insulation, thermal insulation, moisture resistance and impact resistance

Gypsum based ready mix plaster for plastering internal brick/concrete walls & ceiling.
Plastering of brick/ concrete and ceiling using gypsum based ready mix plaster as substitute for cement plastering.
Saving > Cement, sand, water
Advantages > Superior Finish > Less cost than cement Plaster > cooler inside

Application

A-1Ready Mix Plaster for mixing in water to make paste.
A-1Ready Mix Plaster paste marking the levels by Aluminium strip.
A-1Ready Mix Plaster paste is applied to mark vertical leveling marks, which are provided at 3-5 feet intervals.
After 15 minutes, surface is fine finished using a tin plate as shovel.
A-1 Ready Mix Plaster can revolutionize plastering of internal walls and ceiling. This will save river sand & water.
A-1Ready Mix Plaster is an internal plaster, for direct application on brick / block walls & RCC surfaces
A-1Ready Mix Plaster is a premixed, ready to use plaster made from Calcium Sulphate hemi -hydrate to which additives are added to improve its performance.
A-1Ready Mix Plaster is extremely easy to use.
A-1 Plaster is a ready mix plaster to which only water is to be added for its preparation.
The surface where the product is to be applied is slightly wetted & the mixture of gypsum plaster & water is applied directly on the brick wall, once the level and plumb is taken.
The quality of the product is reflected in the finish that is evident after the product application is over.
In fact, the ease of application of the product can be gauged by the fact that, the leveling and application of A-1Ready Mix Plaster can be done by normal Plaster of Paris ( P.O.P). Worker


Price : Rs 0 eachSend Enquiry
 
   
   
 

POP Super Fine Extra White POP

A1 plaster providing high levels of performance in terms of fire protection, sound insulation, thermal insulation, moisture resistance and impact resistance to create modern internal environments that offer comfort and safety for occupants.

Application:

The suitability of the surface / background to be plastered should be evaluated in relation to strength, suction bonding properties, thermal characteristics, shrinkage and soluble salt content.
The thickness in one application should not exceed 11 to 13mm.
If greater thickness is required, the plaster should be applied more than once.
Once the plaster is set suitable fixtures can be put up.
No maintenance is required after the application and setting of the plaster.
If greater thickness is required, the plaster should be applied more than once.
Recommended thickness of plaster of Paris on wall is following.

In case of single coat of plaster:

The common thickness is 12 mm and 15 mm.

In case of two coats of plaster:

  • The total thickness of two coats of plaster should not exceed 20 mm.

In case of concrete surface:

  • The thickness of plaster of Paris should not exceed 15 mm.
  • The thickness of the base coat varies from 10 mm to 12 mm.
  • The thickness of finishing coat varies from 3mm to 8 mm.

In case of three coats of plaster:

  • The thickness of three coatsshould not exceed 25 mm.
  • The thickness of the base coat is about 10 mm to 15 mm.
  • The thickness of second coat varies from 3 mmto 8 mm
  • The thickness of finishing coat varies from 3 mm to 5 mm.

Specification

Plaster of Paris finds its application in construction and sanitary ware industry. and user friendly are some of the salient features of the plaster of Paris, provided by us. We deliver plaster of Paris within the stipulated time frame and that too at very affordable prices. The whiteness of our plaster of Paris stays for a longer period of time. Flawlessly whiteness, brilliant performance.


Price : Rs 0 eachSend Enquiry
 
   
   
 

POP Super Fine POP

Super fine pop is so finely ground that it is a low density powder thus it covers more area with less material. It is also available in good quantity at affordable prices. We offer light coloured, high strength and extra fine Plaster of Paris (POP) . This Plaster of Paris (POP) settles slowly thus gives enough time to the mason/worker to complete his work, another advantage is that after settling the Plaster of Paris (POP) becomes strong thus it increases its longevity.

Application

The suitability of the surface / background to be plastered should be evaluated in relation to strength, suction bonding properties, thermal characteristics, shrinkage and soluble salt content.
The thickness in one application should not exceed 11 to 13mm.
If greater thickness is required, the plaster should be applied more than once.
Once the plaster is set suitable fixtures can be put up.
No maintenance is required after the application and setting of the plaster.
If greater thickness is required, the plaster should be applied more than once.
Recommended thickness of plaster of Paris on wall is following.

In case of single coat of plaster:

The common thickness is 12 mm and 15 mm.

In case of two coats of plaster:

The total thickness of two coats of plaster should not exceed 20 mm.

In case of concrete surface:

  • The thickness of plaster of Paris should not exceed 15 mm.
  • The thickness of the base coat varies from 10 mm to 12 mm.
  • The thickness of finishing coat varies from 3mm to 8 mm.

In case of three coats of plaster:

  • The thickness of three coatsshould not exceed 25 mm.
  • The thickness of the base coat is about 10 mm to 15 mm.
  • The thickness of second coat varies from 3 mmto 8 mm
  • The thickness of finishing coat varies from 3 mm to 5 mm.

Some Important Tips

  • Always mix powder to water and not water to powder.
  • Background surface should be first thoroughly cleaned, brush it with a broom to remove dust and loose mortar.
  • Ensure hands are dry before putting in the bag.
  • Do not use the hooks for handling of POP bags to avoid tearing.
  • Always close the bag after taking out required quantity-to protect it from moisture.
  • Mix the POP with water immediately after taking it out of the bag.
  • Do not temper or mix fresh material once a mix has started to set.

Price : Rs 0 eachSend Enquiry
 
   
   
 

POP Wall Putty (Cement Based)

Product Information

A-1 wall Putty is white cement based putty. It's used to fill fine pores in walls and ceilings, so you get the smooth, dry surface that's so essential for painting. A-1 wall putty has better water-resistance, adhesive strength and durability than ordinary putties. The most significant feature of this putty however, is that it doesn't need to be water cured at all. Making it a mini-revolution in putties!

We offer superior quality Wall Putty that is utilized in large number of industries. It is used for new /old building wall paint previous primer putty interior and exterior. Wall Care Putty is available in varying quantities as per the requirements of customers.

Packaging: Available in 5 & 20 Kg packs.

Application

Areas of Application of A-1 WallPutty:
Exterior & Interior Walls of any building where an aesthetic.
Decorative coating is desired.
Buildings like Houses, Offices, Shopping-Malls, Bungalows, Outhouses, Farmhouses, Stadiums, Trade & Technology Parks, Educational Institutes, Convention Centers, Airport & Railway Stations, Operas & Theatres, Museums & Exhibition Halls and even Flyover Walls.

Most applications of A-1 Wall Putty are

  • The surface should be made free from unwanted adhering material with wire brush/emery paper
  • Use A-1 wall puttyon plastered surface, as a protective base-coat, before you apply expensive paint.
  • If the plaster is made with Grey Cement, useA-1 wall putty to level the surface. Generally, a 5-12 mm coat of this product will remove the undulations.
  • Make a paste of A-1 Wall Putty with water and apply on the already moistened surface in upward direction uniformly with putty blade
  • On drying, remove the projected marks gently with putty blade
  • After about 2-4 hrs, apply second coat of wall putty and see that the total thickness of putty on the wall is about 1 1/2 mm
  • Allow the surface to dry completely and remove any marks with putty blade & then rub the surface gently with very fine emery paper before application of paint
  • Mix the putty thoroughly to get best results and prepare only that much quantity which can be consumed in 1 hour
  • In order to get best results, for new surface area, apply 1 or 2 coats of white cement wash prior to application of putty
  • Do not wet the surface too much before putty is applied.

Price : Rs 0 eachSend Enquiry
 
   
   
 

POP Wall Putty (Gypsm Based)

Product Information

Most reliable product with assured quality & strength.
Our "A-1 Gypsum based wall putty" which works as base coat on the wall and make the wall very attractive-light, flat and smooth surface, a good base for painting, It made to give a superior finish to the interior walls. Premix application gypsum wall putty, it is made of calcium hemihydrates and additives are added to it to improve the performance and workability. This putty works effectively on both even and uneven backgrounds, which means that this interior wall putty can be used for both fine surface finishing and thick base plastering as per the requirements. Gypsum based, Superior & more affordable wall putty as an alternative to currently available wall putty all that are white cement based.

Application

  • This product is suitable for all the coats for hand and machine application. Slightly stir before use and directly apply to plasterboards or interior wall.
  • The interior wall or plasterboard surface must be clean, smooth and firm, dry and without dust or oil.
  • If the plaster is made with Grey Cement, use A-1 wall putty to level the surface. Generally, a 5-12 mm coat of this product will remove the undulations.
  • Use A-1 wall putty on plastered surface, as a protective base-coat, before you apply expensive paint.
  • After it drying fully, then it can be painted
  • Cover tight the lid of barrel or close the bags after use
  • Interior wall putty is applied using a trowel, and daub the putty to the interior wall in average state
  • Mix the putty thoroughly to get best results and prepare only that much quantity which can be consumed in 1 hour
  • In order to get best results, for new surface area, apply 1 or 2 coats of white cement wash prior to application of putty
  • Do not wet the surface too much before putty is applied.
  • Decorative coating is desired. Buildings like Houses, Offices, Shopping-Malls, Bungalows, Outhouses, Farmhouses, Stadiums, Trade & Technology Parks, Educational Institutes, Convention Centers, Airport & Railway Stations, Operas & Theatres, Museums & Exhibition Halls and even Flyover Walls.

Specification

  • Suitable to Internal Surfaces.
  • Easy to Apply
  • Resistant to Fungus and Algae
  • 100% Washable
  • Excellent crack covering capacity.
  • Fast setting (touch dry 15minutes; full set 1-2 hrs)
  • Water Resistant
  • Good adhesion to most surfaces.
  • Low cost & High Strength
  • Good Hardness
  • Excellent Humidity Resistance

Price : Rs 0 eachSend Enquiry
 
   
   
 

Quick Lime for Gold Mine 95%

We can give you bulk packing for quick lime. Available

A. 25 kg Bags

B. 50 Kg Bags

C. 1ton Pallet Packing

Non-hydraulic lime or quicklime is the purest form, made from rocks containing at least 95% calcium carbonate: limestone is burnt and CO2is driven off to produce calcium oxide (CaCO3minus CO2 leaves CaO).

Hydrated lime or ‘bag lime’ from builders’ merchants is calcium oxide slaked with a precise amount of water, which is driven off by the heat of the reaction, leaving a powder.

Hydraulic lime is produced from limestone containing clay, and has the added benefit of being able to set underwater.


Price : Rs 0 eachSend Enquiry
 
   
   
 

Quick Lime for Steel Plant 85%

We can give you bulk packing for quick lime. Available

A. 25 kg Bags

B. 50 Kg Bags

C. 1ton Pallet Packing

Non-hydraulic lime or quicklime is the purest form, made from rocks containing at least 95% calcium carbonate: limestone is burnt and CO2is driven off to produce calcium oxide (CaCO3minus CO2 leaves CaO).

Hydrated lime or ‘bag lime’ from builders’ merchants is calcium oxide slaked with a precise amount of water, which is driven off by the heat of the reaction, leaving a powder.

Hydraulic lime is produced from limestone containing clay, and has the added benefit of being able to set underwater.


Price : Rs 0 eachSend Enquiry
 
   
   
1 |
 

 
 
© All Rights Reserved ABRON- 2012-2020
Home | Company Profile | Products Gallery | Downloads | Faq | Enquiry | Contact Us